Navigation

38L RAR Bead Booster®

‹Return to Previous Page
More Info

Additional information

Weight 28 lbs
Dimensions 17 × 17 × 25 in

Related Products

bead booster on a cart Quick View

8 Gallon Auto Bead Booster®

The GB-8A is the largest Bead Booster® in Gaither’s booster line. It carries an 8 gallon (32 Liter) tank which allows for use on a greater range of tire sizes. It also has two unique features: an Automatic Valve with a one-touch foot pedal release mechanism, and a built-in tire stand that automatically sets the bottom bead allowing for use of lower air pressures. Simply fill the Bead Booster® to the necessary pressure, rest the tire/wheel against the stand, aim the barrel between the tire bead and wheel flange, and press the foot pedal! This instantaneous blast of air sets the bead of the tire using less pressure than a manual unit, therefore making it the safest unit available. The Bead Booster® is still completely portable for use on any service truck. The GB-8A also features a safety pop-off valve to prevent overfilling, an Air Whip Hose, and a set of goggles and earplugs for protection. All of Gaither’s Bead Booster® tanks are ASME and fully CE approved and certified. The tanks are also coated inside and outside to guarantee maximum lifespan. HOW IT WORKS MOUNTING: Gaither’s Automatic 8 Gallon Bead Booster® is designed to assist in the inflation of tubeless tires. This is the largest tank capacity of Gaither’s bead-seating product range. Fill the tank to the desired pressure, and then lean the tire/wheel assembly against the built-in stand of the unit. This automatically sets the back bead of the tire. Attach an air line to the valve stem of the wheel and aim the barrel between the tire bead and wheel flange while holding the barrel with both hands. Instead of using a manual release valve, press the foot pedal release mechanism located on the lower part of the cage to allow an instantaneous blast of air to set the bead. Because the automatic valve releases the air much faster, less air pressure is necessary for the tank and is, therefore, more efficient than manual units. Specs: 30 kg Download product information.
$99.00 Add to cart
ecube Tire Macine Quick View

ECUBE

The ecube is the ultimate mobile all-in-one tire servicing machine. It is loaded with features to take advantage of the on-demand consumer revolution. Each unit comes equipped with the following
  • Semi-automatic tire changer
  • 2D wheel balancer
  • Silenced air compressor
  • 48V Smart Lithium battery bank
  • Multi-function touch screen display
For years tire shops and vehicle outfitters have been attempting to find a way to make mobile tire service a viable option for adapting to the on-demand consumer revolution. This has proven difficult due to the size of traditional equipment. After installing a tire changer, balancer, air compressor, and more in a van or trailer, there is very little room left for inventory or other revenue-generating equipment. There are also other problems with this approach, including managing noise levels as well as the challenge of effectively powering the machines needed for proper servicing. Our ecube aims to solve these problems once and for all. The ecube was designed from the ground up to be the ultimate mobile tire service solution. It comes equipped with a semi-automatic tire changer, wheel balancer, silenced air compressor and is powered by a Lithium-Ion battery bank. All of this fits in a compact form factor that measures 59in long 22in wide and 73.25in tall while only weighing 990lbs. Because of its size, the ecube is small enough to fit in a van or trailer while still allowing space for tire racks, jacks, safety equipment, and more. The ecube makes the challenges of mobile tire service a thing of the past. Learn More The purchase of an ecube comes with full installation service and personalized training. Interested? Contact Us for pricing and availability.

Contact Us For Details

smart disc tire cart Quick View

Smart Disc

The Smart Disc guarantees extra mobility and flexibility during tire servicing. The robust discs are fitted with casters so that they can easily transport tires and wheel assemblies quickly and efficiently. It also works with the Winntec Smart Cart so that entire sets of tires and wheels can be moved across the workshop to a warehouse or even over rough terrain.
  • Designed to handle over 350lbs.
  • Move wheel assemblies with ease.
  • Avoid injuries from unnecessary lifting.
  • Create a unique showroom display.
$120.00 Add to cart
Bead Bazooka Stand Quick View

BEAD BAZOOKA® Charging Station

Floor space can be one of the most valuable assets in the workshop. Make sure yours is as clean and tidy as possible with the Bead Bazooka® Changing Station. This stand gives you the perfect place to keep your Bead Bazooka® safe and out of the way until it is needed.
  • Allows technicians to store the BEAD BAZOOKA® near the working area without leaving it on the floor.
  • Protects the tool from dropping, being kicked, broken components, etc.
  • Allows technicians to fill the tank while in the holster and offers a direct view of the pressure gauge.
  • Helps keep the shop clean and safer.
  • Accessory hooks are convenient storage for airlines, tire wedges, eye protection, etc.
  • Works with all BEAD BAZOOKA® models.
$108.00 Add to cart
bead pressing tool for tire changing machine Quick View

Bead Pressing Tool

This tool was specifically designed for the mounting and demounting of all types of Run Flat, Low Profile, and SSR Tires. It makes it much easier for one person to change even the most difficult tires with any tire changer.
$269.00 Add to cart
centering bolts for wheel installation Quick View

Centering Bolts

These Centering Bolts make installing wheelsets fast and easy. They work by helping to gently guide a wheelset into place, avoiding unsightly scratches or expensive brake damage. Each bolt can be purchased separately or as a complete set.
  • Made from an Aero Alloy
  • Protects against accidental damage
  • Increases productivity
  • Perfect accessory for wheel handlers
$15.00$60.00 Select options
jack handle protector Quick View

Handle Protector

Gaither Tool Co. introduces a new and simple product that protects your vehicle from unnecessary damage.  Our GHP-01 promotes safety in the shop and reduces the risk of claims and repairs.
  • Made of a durable synthetic rubber compound
  • Fits multiple jack manufacturers' handles and popular tire tools
  • Protects vehicles from scratches or dents caused by falling jack handles and unstable tools in the shop
  • The design absorbs the dent / scratch-causing force as the handle contacts an adjacent vehicle
  • Multiple colors are available (minimum order quantity applies) (Only black handle protectors are available online)
Click here to download the specs. Click here to view the video.
$17.50 Add to cart
UWT Quick View

U.W.T. Wheel Weight Pliers & Hammer

Heavy-duty wheel weight pliers and hammer, the only tool on the market which will remove all wheel weights Fast & Easy without pinching fingers or scratching wheels.
  • Heavy-duty design
  • No pinching fingers or scratching wheels
  • FAST & EASY
  • Made in the USA
$87.95 Add to cart
Digital Tire Pressure Gauge/Inflator Quick View

Digital Tire Pressure Gauge/Inflator

Our Digital Tire Pressure Gauge/Inflator offers all of the quality and dependability that the industry has come to expect from Gaither in a sleek and compact form factor. It delivers pinpoint accurate pressure readings via a digital backlit display that is easy to read in any environment. Its durable design means that it can stand up to whatever conditions you throw at it.
  • An easy-to-use Digital Tire Pressure Gauge and Inflator.
  • Just connect to air and press down on the trigger to inflate.
  • With its durable handheld design, this inflator is not only comfortable to use, but also strong enough to withstand the punishment of any shop.
$79.95 Add to cart
bead booster bead seater Quick View

Manual Bead Booster®

A simple and reliable bead seater designed to be used on a wide variety of vehicles, including commercial trucks. The Bead Booster® features a safety pop-off valve to prevent overfilling and a set of goggles and earplugs for protection. All of Gaither’s Bead Booster® tanks are ASME, CE and CRN approved and certified. Bead Booster® GB-5Z is available for private label programs. HOW THE Bead Booster® GB-5Z WORKS: Bead Booster® is designed to assist in the inflation of tubeless tires by setting the bead with a quick release of air pressure. To use the Bead Booster® efficiently, simply fill the tank to the necessary pressure and attach an air line to the valve stem of the wheel. Then aim the barrel between the tire bead and wheel flange, and release the manual valve in order to allow a blast of air to set the bead. Download the user manual.
$319.00 Add to cart
NEED HELP CHOOSING THE RIGHT EQUIPMENT?

Our highly qualified team of experts is here to help you. Contact us today.


800-452-5010

Contact Us